Difference between revisions of "University of Toronto Human Powered Vehicle"

From Skulepedia
Jump to navigation Jump to search
(→‎2015 - 2016: Added content)
Tags: Mobile edit, Mobile web edit
(→‎External links: Added Content)
Tags: Mobile edit, Mobile web edit
Line 75: Line 75:
  
 
==External links==
 
==External links==
 +
 +
* [https://hpvdt.skule.ca/ Team Webpage]
 +
* [https://www.facebook.com/hpvdt.skule/ Team Facebook]
 
* [http://hpo.ornithopter.net Human Powered Ornithopter Project]
 
* [http://hpo.ornithopter.net Human Powered Ornithopter Project]
  
 
[[Category:Design and Competition Teams]]
 
[[Category:Design and Competition Teams]]

Revision as of 14:39, 25 September 2019

The University of Toronto Human Powered Vehicle Design Team (HPVDT) is a design team focused around designing and building vehicles solely propelled by human power. The team's past and current projects include an ornithopter, a helicopter, an airplane, a submarine, as well as numerous land vehicles.

Human Powered Ornithropter

During the summer of 2008 a group of graduate students founded the club to design and build an ornithopter (wing-flapping aircraft) that used human power alone. The project was headed by Todd Reichert (NΨ 0T4 + Film) and Cameron Robertson (NΨ 0T8). The ornithopter was successfully completed and made a record setting flight as the first human powered ornithopter.

The human-powered ornithopter during an early-morning test flight

Land Vehicles

After completing the ornithopter the team moved onto their the next project, the Human Powered Vehicle (HPV). The goal was to design an aerodynamically faired bicycle capable of reaching speeds in excess of 100 km/h.

2008 - 2009

No vehicle was successfully built except for a carbon fibre frame which went on to become a training vehicle.

2009 - 2010

The team built and competed with ACE. The team competed at the ASME Human Powered Vehicle Challenge and at Battle Mountain Human Powered Speed Challenge. ACE's top speed was approximately 100 km/h. The team scored second in both men and women sprint events, as well as third place overall in the Speed Class at the ASME event, a great performance for a new team. Furthermore, the team scored the collegiate speed record at the Battle Mountain event, with a 103km/h run. This was the first year undergraduate students were a part of the team. ACE used an aluminum frame supported in a fairing constructed from Kevlar and carbon fibre. It's total length was approximately 9 ft.

The ACE speedbike

2010 - 2011

Taking what they learned in previous years, Vortex was built. Vortex was superior to ACE in many ways: it boasted superior aerodynamics, simpler front wheel fairing, a removable drive-train mechanism and used a door rather than a split dividing the top from the bottom. It was also much smaller with a length of approximately 7 ft.

The team took Vortex to compete in the ASME HPVC, this year on the Indianapolis speedway. The team placed 1st in women's sprint, 2nd in men's sprint, 1st in endurance, 6th in utility and 3rd in design. The team was awarded 1st overall in the competition.

In September of 2011 the team competed in the Battle Mountain WHPSC again, this time in hopes of setting a world speed record. After a week of racing the team marked a top speed of 116.9 km/h by Todd Reichert, still well short of the world record.

The Vortex speedbike

2011 - 2012

HPVDT significantly redesigned all aspects of the design for the next iteration of speedbike. Led by co-captains Trefor Evans (NΨ 1T3) and Aidan Muller (MSE 1T3), the team proceeded to manufacture the Bluenose vehicle. This design boasted much-improved aerodynamics, highly-durable construction, revised steering geometry, and a new landing gear system.

Bluenose competed at the 2012 ASME HPVC, where it won awards in the Design and Sprint events. The team finished 4th overall.

During the summer of 2012, the core membership of HPVDT was recruited to the newly-formed AeroVelo Inc. design team. The group relocated to Tottenham, ON, where they designed and manufactured the Atlas human-powered helicopter until September.

WHPSC 2012 was disappointing. A variety of handling and visibility problems prevented Bluenose from reaching its potential, and the team failed to improve upon Vortex's top speed.

Bluenose2012.JPG

2012 - 2013

Knowing that Bluenose could be greatly improved for future high-speed events, the team decided to take a different approach for the more utility-oriented ASME event. A faired tricycle was designed, using many of the same structural features as the previous two-wheeled vehicles. This new vehicle - dubbed Celero - was slower, but far more stable and reliable than the team's previous entries.

Despite mediocre performance in the Design and Innovation categories, Celero placed well in both the Sprint and Endurance races. In fact, the Endurance race was won by an unusually-large margin; Celero finished the 2.5 hour event having covered nearly 20% more distance than the next-fastest vehicle. Overall, HPVDT finished 3rd in this competition. Shortly after this event, Calvin Moes (NΨ 1T3+PEY) was elected as the new Team Captain. Long may he rule!

Collaboration with AeroVelo on the human-powered helicopter continued through 2013 until that project achieved its goal of winning the coveted Sikorsky Prize in June. Following that success, HPVDT continued to collaborate with members of AeroVelo to revise certain aspect of the Bluenose speedbike in preparation for WHPSC 2013.

The 2013 World Human-Powered Speed Challenge remains one of HPVDT's greatest successes. With low-friction tires, a custom-built camera vision system, and four well-practiced riders, Bluenose was ready to go fast. Vortex was also tuned up for three of the team's less-experienced riders. Despite some handling problems early in the week-long event, Bluenose eventually reached a top speed of 125 km/h (alumnus rider Todd Reichert), while Calvin Moes and Trefor Evans both set collegiate records. The team finished with an unprecedented 3 riders over 75 MPH, and all seven riders set ambitious personal bests. HPVDT was presented with a one-time Innovation Award for our camera vision system, which was a vast improvement over other designs in terms of clarity, function, and reliability.

The Celero trike at ASME HPVC 2013 Bluenose running with camera vision system at WHPSC 2013

2013 - 2014

HPVDT built a leaning tricycle for the ASME HPVC event. It performed well in the Innovation and Speed events, but was mediocre in Design and Endurance. The team finished 7th overall.

During the summer of 2014, members of HPVDT collaborated with AeroVelo Inc. to design and build the Eta speedbike. With a myriad of new design features and unparalleled aerodynamic quality, Eta was a favorite among the HPV community to set a new speed record.

In order to better support the Eta project, HPVDT did not field any of its own vehicles at WHPSC 2014. Along with AeroVelo's top athlete Todd Reichert, HPVDT/AeroVelo riders Trefor Evans and Calvin Moes competed in the week of racing. Todd managed to set a personal best speed, but did not achieve the goal of a new world speed record. Following the competition, strategic differences between AeroVelo and HPVDT resulted in the two organizations ceasing large-scale collaboration. As part of this agreement, HPVDT retained the right to build a "clone" of the Eta speedbike.

the Valkyrie leaning tricycle at ASME HPVC 2014 The Eta speedbike at WHPSC 2014

New Direction

With the team once again growing in terms of membership and ambition, it was decided that HPVDT should begin to tackle more and larger projects. Since late 2014, we have never been doing only one thing. As part of this expansion, HPVDT is no longer exclusively working on land vehicles.

2014 - 2015

Again working towards a more practical vehicle design, the team came up with a partially-faired lowracer - a recumbent bike with very little frontal area. The design included several novel features, including an ill-fated carbon leaf spring suspension system.

The 2015 ASME competition was a mixed experience. The new Viteza design proved less versatile than expected, and the suspension system introduced unanticipated instabilities. Regardless, the team scored well in Innovation and won 1st place in the Design event.

During the summer term, several members of HPVDT undertook to construct an updated version of the Eta speedbike, to be called Eta Prime. While not completed in time for WHPSC 2015, the new speedbike project made excellent progress. Among the modifications made were a lighter fairing, a stiffer frame, and an updated electronics package.

Concurrently with work on the new speedbike, HPVDT undertook to design and build a human-powered submarine with the goal of smashing existing records for both speed and endurance. The project began with a feasibility study followed by extensive research into hydrodynamics, SCUBA technology, and safety systems. By the end of 2015, all major design decisions had been made and work was progressing towards finalization of the hydrodynamic shape.

Viteza at ASME HPVC 2015 Eta Prime Outer Shell.JPG Axios submarine rendering during the early design phase

2015 - 2016

While continuing work on Axios and Eta Prime, HPVDT designed an improved version of Vortex called Cyclone. Cyclone features a more sophisticated drivetrain structure, retractable landing gear for low speed stability, and improved composites techniques, resulting in a lighter vehicle. The vehicle was not completed in time for ASME 2016, but was completed and raced at the Northbrook Velodrome in July of that year.

External links